18th-century peidao in iron fangshi mounts
This item has been sold.
Overall length

84.2 cm / 33.1 inch

Blade length

71 cm / 28 inch

Blade width

5 mm (forte)
3.5 mm (middle)
3 mm (widest at tip)

Blade thickness

30.5 mm (forte)
30 mm (middle)
29 mm (widest at tip)

Weight without scabbard

628 grams

Point of balance

21.5 cm from guard

Origin

China, Qing dynasty

Materials

Iron, steel, wood, cotton.
Scabbard: Iron, wood, brass, leather, lacquer.

Dating

18th century

Sold

Interested?
Anything similar for sale?

Contact me

Introduction

The terms peidao or yaodao are synonyms that were in use simultaneously in Qing official texts to denote the standard waist-worn saber of their military. Peidao is the classier term that seems to have come in vogue in the 18th-century, a reference to a single edged straightsword worn by the legendary Duke of Zhou.

The rank and file however usually called it yaodao in both the Ming and Qing dynasties. Yaodao of the first half of the dynasty were mounted in fangshi or "angular style" fittings, with a scabbard and handle to match this geometry. By the mid 18th century a rounded style got introduced in the upper levels of the Qing hierarchy, which over several decades gradually made it to the rank and file to become the prevalent style of the 19th century.

This Example

A classic example of an 18th-century Chinese military saber mounted in fangshi (angular style). Its slender blade, of liuyedao form, with two grooves, a wider upper groove with a narrow companion. Near the center of percussion, the upper groove stops to make way for a subtle backedge. The narrow groove fades a bit further near the tip. The tip has a subtle swelling as if it's the first stage of development towards the niuweidao or "oxtail saber" that emerged in the second half of the 19th century. The blade was only lightly cleaned, in its current state, there are some subtle hints of its forge folded construction with an inserted hardened edge.

It is mounted in a full set of classic 18th-century fangshi fittings, plain unadorned iron save for the tiliang or "suspension bar" which is chiseled and pierced. This decor was somehow deemed important because most sabers have at least some chiseling there, even if the rest is completely unadorned like this one.

Early 19th century regulations on the manufacture of military equipment describe the process of making the simple military brass mounted saber of that period in detail, no part is adorned but again a whole paragraph is devoted to the "cloud decoration" on the suspension bar.1 What makes this more interesting is that the purpose of the text was to standardize the manufacture of military equipment, with the goal of cost reduction. Yet, the emperor ordered to have that little part chiseled on the hundreds of thousands of sabers made for his military.2

The wooden scabbard is covered with leather, lacquered black. Losses here and there to the leather covering but what remains is stable. The first section of the scabbard is not covered with leather but instead painted black, possibly indicating a repair. The scabbard mouthpiece seems to be black patinated brass and is probably a later, possibly working-life replacement. The rest of the fittings with a black residue, which is perhaps the huǒqī (火漆 ) or "fire lacquer" / "wax" that is mentioned as a treatment for iron mounts.3

It retains its original wooden handle, peening of the tang at the pommel remains intact indicating it was never remounted. The current grip wrap is my work, I had to replace a non-historical recent wrap.

 

 

Conclusion

A nice representative example of an 18th-century iron mounted saber, the workhorse of the Qing military, retaining most of its original parts.


Notes
1. See 工部軍器則例 (gōngbù jūnqì zélì) or "Regulations and precedents on arms manufacture for the Board of Works" of 1811. Chapter 36.
2. See Ulrich Theobald's essay: "Space and Place in Administrative Military Regulations of Qing China".
3. 工部軍器則例 (gōngbù jūnqì zélì) or "Regulations and precedents on arms manufacture for the Board of Works"

 

A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber
A classic Chinese iron mounted saber

 

Do you have anything for sale?

I might be interested in buying it.

Contact me
Currently available:

A very rare Chinese saber guard dating from the height of the Qing dynasty.

€1500,-

Of classic shape, with a leaf-shaped blade on a socket, connected by a cast bronze base.

€375,-

A standard pattern Qing military saber, but with the rare addition of a label in Manchu.

€1900,-

A simple utilitarian weapon, probably made for rural martial artists or militia.

€450,-

Southern Chinese officer style saber with later inscription H.Hunt 1876.

€2000,-

In the style of northern work of the 16th and 17th centuries

€3000,-